盗墓笔记全集,小说改编的网页游戏,遮天

liu2004

級別: *

發送短信
加為好友

精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看liu2004的主題 / 回貼

樓主發表于: 2011-05-04 20:42

只看樓主 | 小中大

要的請留郵箱，太大。

Motion Controller Peripheral Software Package
SW6RNC-GSVHELPE
-------------------------------------------------------------------------

Thank you for purchasing this software.
You should carefully read the following terms and conditions
before using this software. And that you can refer the manuals
of WindowsNT/98/2000/XP to resolve the basic operation of
Windows NT/98/2000/XP.

1. Operating requirements

  (a) Hardware requirements
    ?  100% WindowsNT/98/2000/XP compatible PC/AT
            (not support multi-processor)
    ?   CPU :
                Windows NT/98 : Pentium 133-MHz or more recommended
                Windows 2000  : Pentium II 233-MHz or more recommended
                Windows XP    : Pentium II 450-MHz or more recommended
                 (Pentium II 233-MHz or more for Windows 2000)
    ?   Memory : It depends on the OS environment.
                Windows NT/98 : 32 MB or more recommended.
                Windows 2000  : 64 MB or more recommended.
                Windows XP    : 192 MB or more recommended.
    ?   Free disk: 68 MB or more
    ?   Monitor resolution: SVGA(800*600/256 Colors) or more

  (b) OS requirements
    ?   Windows NT Workstation Ver. 4.0(Service Pack2 or later)
    ?   Windows 98
        ?   Windows 2000
        ?   Windows XP Professional
        ?   Windows XP Home Edition

        * The following Windows version is not supported.
            ? Windows NT 3.5 Workstation
        ? Windows NT 3.51 Workstation
            ? Windows NT Server
            ? Windows 95
        * In Windows NT 4.0,the use needs Microsoft Internet Explorer 3.01
          or higher.

2. Installation method

  First, close any others applications running on Windows NT/98/2000/XP.

  From [Start] select [Run...],input "X:setup.exe"(X: CD-ROM Drive)
or click [Browse] and select "Setup.exe" from the CD-ROM drive.
  After starting the installor , follow the instructions of the installor.

3. Notice

(1) When you install this software to a drive which is compressed by
DriveSpace or other tools, if it freezes in installation, please increase
the free space of the drive or select other drive which is not compressed
to install this software.

(2) If you want to change the installation destination or reinstall it,
please uninstall it before installing it again.

(3) Depending on the system font size of Windows NT/98/2000/XP, sometimes
the screen may not be displayed properly, please use a small size font.

-------------------------------------------------------------------------------------

Microsoft and MS-DOS, Windows, Windows NT are registered trademarks of
Microsoft Corporation in the United States and other countries.

Copyright(c) 2001 MITSUBISHI ELECTRIC CORPORATION All Rights Reserved.